Sony JewellersCall the counter

Most gold jewellery that walks into our Mississauga workshop isn't broken beyond saving — it's worn, stretched, bent or loose in ways that are entirely fixable. But "fixable" covers a huge range of work, and two repairs that look identical to the owner can be very different jobs on the bench. Here are the repairs we see most, and the factors that genuinely determine what each one involves.

The Repairs We See Most

Broken chains and soldering. The single most common repair. A snapped link on a 22k gold chain is usually a clean solder job — but the chain's construction matters enormously. A simple cable link is straightforward; a hollow rope or intricate machine-made pattern requires far more careful work to rejoin invisibly.

Clasp replacement. Clasps are the hardest-working part of any chain or bracelet, and springs wear out long before the gold does. Replacing one is routine; the variables are the clasp style, its size relative to the piece, and whether the jump rings around it have worn thin too.

Ring resizing. Sizing up or down is everyday bench work, but the ring's design sets the difficulty. A plain band is simple. A ring with stones, engraving or patterns that wrap the full band takes planning, because the design has to survive the cut.

Bangle straightening and dent removal. 22k gold is soft, and bangles take daily knocks. Gentle reshaping restores most of them — the deciding factors are how severe the bend is and whether the bangle is solid or hollow, since hollow pieces need much more delicate handling.

Stone tightening and replacement. Settings loosen with wear. Catching a loose stone early is a quick tighten; a lost stone means matching and setting a replacement, which depends heavily on the stone and setting style.

The Factors That Shape Any Repair

Purity. 22k gold is softer and behaves differently under heat than 14k or 18k. Repairing it well requires matching solder and genuine familiarity with high-purity gold — this is exactly where a 22k specialist matters.

Construction. Solid versus hollow, handmade versus machine-made, plain versus stone-set. Construction determines both the technique and the risk, and an honest jeweller will explain this before starting.

Condition around the break. A chain that snapped at one weak link may be uniformly worn elsewhere. Good repair work addresses the cause, not just the visible symptom — otherwise you're back in a month with the next link.

The piece's history. Previous repairs, old solder joints, and years of wear all affect how a piece takes new work. This is why we assess every item individually rather than quoting sight unseen.

Why "Who Repairs It" Matters as Much as "What's Broken"

High-purity gold is unforgiving of shortcuts. Solder that doesn't match the karat leaves a visible seam and a weak joint; too much heat near a stone-set section risks the setting; aggressive polishing thins metal that's already worn. The difference between a repair you never think about again and one that fails in six months usually comes down to the hands doing the work and their familiarity with 22k specifically. Before leaving a treasured piece anywhere, ask two questions: "Is the work done here, in-house?" and "Who exactly will be doing it?" A store with a real workshop answers both instantly.

What a Proper Repair Process Looks Like

Bring the piece in. A jeweller examines it in front of you, explains what's wrong and what the fix involves, and gives you a free no-obligation quote with a clear pickup date — before any work begins. At Sony Jewellers every repair is done by our own hands in our own Mississauga workshop; your gold never leaves the store or passes through a third-party shop. That's how repair should work anywhere you take it.

Have a piece that needs attention? Bring it to Sony Jewellers for a free, no-obligation assessment. See all repair services →

Bring It In. We'll Take a Look.

Closed Mondays. Tue–Sun 11 AM – 7:30 PM.